登入或註冊帳號即可開始張貼主題
|
|
|
張貼者: 尿尿小P
張貼時間: 2009/02/13
|
過年時後輪軸被我踩斷才剛剛修好而已,
剛剛去公園練 , 結果又把死飛踩成活飛了 ,
請問飛輪跟花鼓可以焊嗎..???
直接把它焊死繼續騎可以嗎.???
若死飛是鋼製的跟花鼓可以焊嗎..???
焊好可以繼續騎嗎..???
還是要換整組新輪組了..???
剛剛去公園練 , 結果又把死飛踩成活飛了 ,
請問飛輪跟花鼓可以焊嗎..???
直接把它焊死繼續騎可以嗎.???
若死飛是鋼製的跟花鼓可以焊嗎..???
焊好可以繼續騎嗎..???
還是要換整組新輪組了..???
|
|
|
|
回應者: 尿尿小P
回應時間: 2009/02/13
|
.jpg)
|
|
|
|
回應者: 尿尿小P
回應時間: 2009/02/14
|
引用 ㊣鴨鴨龍㊣ 的文章-口香糖不但好吃新奇又好玩!
還可以吹好大的泡泡唷~~
阿龍 echo 看這裡
http://www.52bike.com/bbs/index.asp?boardid=134
裡面有卡式死飛花鼓
|
|
|
|
回應者: 尿尿小P
回應時間: 2009/02/14
|
引用 ㊣鴨鴨龍㊣ 的文章-酷耶!第一次看到還有卡式的說~
不過這樣的強度夠嗎?還蠻懷疑的說!?
http://www.52bike.com/bbs/dispbbs.asp?boardID=134&ID=17665&page=1
我覺得超讚的 ,
鎖牙的會越踩越緊 , 難拆又會滑牙 ,
卡座的一定比鎖牙堅固 ,
echo 的東西越看越喜歡說 , 阿龍乾脆去談台灣代理啦...
.jpg)
|
|
|
回應者: Kevin
回應時間: 2009/02/15
|
引用 尿尿小P 的文章-引用 ㊣鴨鴨龍㊣ 的文章-酷耶!第一次看到還有卡式的說~
不過這樣的強度夠嗎?還蠻懷疑的說!?
http://www.52bike.com/bbs/dispbbs.asp?boardID=134&ID=17665&page=1
我覺得超讚的 ,
鎖牙的會越踩越緊 , 難拆又會滑牙 ,
卡座的一定比鎖牙堅固 ,
echo 的東西越看越喜歡說 , 阿龍乾脆去談台灣代理啦...
i have had that echo hub. it sucks. actually pretty much all echo components suck. the axle on the hub was machined maybe 0.5mm too thick, and i needed to file the dropout oon almost every frame. it has a tabbed axle to stop the axle from spinning when you tighten the bolt, but it makes the hub really difficult to put into the frame. it's also really heavy.
.jpg)
|
|
|
回應者: mark
回應時間: 2009/02/15
|
引用 Kevin 的文章-引用 尿尿小P 的文章-引用 ㊣鴨鴨龍㊣ 的文章-酷耶!第一次看到還有卡式的說~
不過這樣的強度夠嗎?還蠻懷疑的說!?
http://www.52bike.com/bbs/dispbbs.asp?boardID=134&ID=17665&page=1
我覺得超讚的 ,
鎖牙的會越踩越緊 , 難拆又會滑牙 ,
卡座的一定比鎖牙堅固 ,
echo 的東西越看越喜歡說 , 阿龍乾脆去談台灣代理啦...
i have had that echo hub. it sucks. actually pretty much all echo components suck. the axle on the hub was machined maybe 0.5mm too thick, and i needed to file the dropout oon almost every frame. it has a tabbed axle to stop the axle from spinning when you tighten the bolt, but it makes the hub really difficult to put into the frame. it's also really heavy.
翻譯: KEVIN 說他有echo花鼓, 他說echo的組件都很爛, 花鼓軸心公差多了0.5釐米, 車架後爪勾要自己磨過才能合, 軸心很難裝上車架, 而且很重.
總結說起來就是中看不中用就是了.
.jpg)