過年時後輪軸被我踩斷才剛剛修好而已,
剛剛去公園練 , 結果又把死飛踩成活飛了 ,
請問飛輪跟花鼓可以焊嗎..???
直接把它焊死繼續騎可以嗎.???
若死飛是鋼製的跟花鼓可以焊嗎..???
焊好可以繼續騎嗎..???
還是要換整組新輪組了..???

用一塊口香糖黏起來就好了.....

Quote mark article-

用一塊口香糖黏起來就好了.....

你可以幫我黏嗎..???
黏完有沒有保固..???

Quote 尿尿小P article-

Quote mark article-

用一塊口香糖黏起來就好了.....

你可以幫我黏嗎..???
黏完有沒有保固..???

可以啊, 小P把車子PO上來, 我直接在銀幕上幫你黏, 保固一萬年.

口香糖不但好吃新奇又好玩!
還可以吹好大的泡泡唷~~

酷耶!第一次看到還有卡式的說~

不過這樣的強度夠嗎?還蠻懷疑的說!?

Quote ㊣鴨鴨龍㊣ article-

酷耶!第一次看到還有卡式的說~

不過這樣的強度夠嗎?還蠻懷疑的說!?

http://www.52bike.com/bbs/dispbbs.asp?boardID=134&ID=17665&page=1

我覺得超讚的 ,
鎖牙的會越踩越緊 , 難拆又會滑牙 ,
卡座的一定比鎖牙堅固 ,

echo 的東西越看越喜歡說 , 阿龍乾脆去談台灣代理啦...

重點是我要去找誰代理啊!?
= =不會要我飛去毒奶生產地吧??

Quote 尿尿小P article-

Quote ㊣鴨鴨龍㊣ article-

酷耶!第一次看到還有卡式的說~

不過這樣的強度夠嗎?還蠻懷疑的說!?

http://www.52bike.com/bbs/dispbbs.asp?boardID=134&ID=17665&page=1

我覺得超讚的 ,
鎖牙的會越踩越緊 , 難拆又會滑牙 ,
卡座的一定比鎖牙堅固 ,

echo 的東西越看越喜歡說 , 阿龍乾脆去談台灣代理啦...

i have had that echo hub. it sucks. actually pretty much all echo components suck. the axle on the hub was machined maybe 0.5mm too thick, and i needed to file the dropout oon almost every frame. it has a tabbed axle to stop the axle from spinning when you tighten the bolt, but it makes the hub really difficult to put into the frame. it's also really heavy.

Quote Kevin article-

Quote 尿尿小P article-

Quote ㊣鴨鴨龍㊣ article-

酷耶!第一次看到還有卡式的說~

不過這樣的強度夠嗎?還蠻懷疑的說!?

http://www.52bike.com/bbs/dispbbs.asp?boardID=134&ID=17665&page=1

我覺得超讚的 ,
鎖牙的會越踩越緊 , 難拆又會滑牙 ,
卡座的一定比鎖牙堅固 ,

echo 的東西越看越喜歡說 , 阿龍乾脆去談台灣代理啦...

i have had that echo hub. it sucks. actually pretty much all echo components suck. the axle on the hub was machined maybe 0.5mm too thick, and i needed to file the dropout oon almost every frame. it has a tabbed axle to stop the axle from spinning when you tighten the bolt, but it makes the hub really difficult to put into the frame. it's also really heavy.

翻譯: KEVIN 說他有echo花鼓, 他說echo的組件都很爛, 花鼓軸心公差多了0.5釐米, 車架後爪勾要自己磨過才能合, 軸心很難裝上車架, 而且很重.

總結說起來就是中看不中用就是了.

別對大陸的東西抱著太大的期望

確實echo的軸心好像是 12mm 的...

話說台灣目前能買到的零件大都也只有阿陸的 , 不是..??? 很難有其他選擇阿..
到底是西方的還是大陸的好 , 用到現在 , 我現在也霧煞煞了 .