登入或註冊帳號即可開始張貼主題
>   主題: [硬體] V夾安裝介紹   4 回應    4641 觀看   
btt
  V夾安裝介紹
  張貼者: 橘祖     張貼時間: 2010/05/06
   
 主題 
這是一篇介紹V夾安裝時可能會遇到的問題及粗略的解法http://www.kobike.com/shop/trends.asp?id=108,有興趣搞V夾的人可以參考看看!! 當然有經驗的也可分享一下~~~~~

V夾的好處有:
1. 重量輕
2. 維修方便
3. 價格較低

壞處有:
1. 調整不便
2. 力量較小
3. 線的阻力會影響手感

以上.......
btt
  RE: V夾安裝介紹
  回應者: mark     回應時間: 2010/05/06
   
V夾煞車還有一個好處是煞車夾器本身可以免於車架在煞車時撐開, 因此不用裝煞車補強版 BOOSTER.

因應V夾煞車的使用, 現在也有攀岩車用的吱吱叫V夾煞車皮可用.
btt
  RE: V夾安裝介紹
  回應者: 攀岩以斯拉     回應時間: 2010/05/06
   
網頁進不去 看不到...
btt
  RE: V夾安裝介紹
  回應者: Kevin     回應時間: 2010/05/06
   
actually that is not true about vbrakes not needing a booster. because of the mechanical advantage created by the brake arms, the frames tend to flex more. i ran v-brakes for a long time, and they worked great. i would say the brake offered equal hold, but slightly less bite.

i ended up changing to hs-33 because of weight. I do prefer a water bled hs-33 over v-brake now.
btt
  RE: V夾安裝介紹
  回應者: Kevin     回應時間: 2010/05/06
   
oh, and the v-brake setup was much more quiet with the avid ultimate brake arms. the sealed bearing setup means the lever arms have no plan, and do not vibrate. i really miss having a silent brake.