登入或註冊帳號即可開始張貼主題
.jpg)
|
|
|
回應者: Kevin
回應時間: 2011/01/31
|
I don't care where it's made, as long as it works. Clearly, this bb does not work.
.jpg)
|
|
|
回應者: 老K
回應時間: 2011/02/03
|
Gordon needs a new BB parts who can send him one good and cheap that the reason for transport expense too high from Taiwan to San- Vincent eventhough free of charge for the BB.
|
|
|
回應者: OA
回應時間: 2011/02/08
|
There where a few replies in Chinese so maybe somone already said this.
ISIS spline BB's have a taper. It looks like one or a combination of two problems. The crank spline/taper is worn or not made to spec or the BB spline/taper is not made to spec/worn. Before you replace the BB or crank I would try to identify which part is not to spec. Do you have any old BB's or cranks laying around?
ISIS spline BB's have a taper. It looks like one or a combination of two problems. The crank spline/taper is worn or not made to spec or the BB spline/taper is not made to spec/worn. Before you replace the BB or crank I would try to identify which part is not to spec. Do you have any old BB's or cranks laying around?