登入或註冊帳號即可開始張貼主題
>   主題: [硬體] details on dob btt   13 回應    8318 觀看   
btt
  details on dob btt
  張貼者: Kevin     張貼時間: 2008/05/27
   
 主題 
Finished the front dob wheel last night. also got some monty snail tensioners to stop the chain from getting loose all the time


images/forum/DSC03162.JPG

images/forum/DSC03163.JPG

images/forum/DSC03165.JPG

images/forum/DSC03167.JPG

images/forum/DSC03168.JPG

images/forum/DSC03170.JPG

images/forum/feebruh0483b4.jpg


Spec :

Frame : Dob 26"
Headset : Meta
Fork : Meta (410mm, 35mm rake)
Stem : Pazzaz 120x20
Bar : Onza Carbon fiber cut to 710mm
BB : FSA 68x122mm
Front Brake : Hope mono trials with 7" hayes v2 rotor
Rear Brake : Magura hs33 with koxx bloxx blue and GU cnc lever. Bled with water
New Try-All 2 bolt booster
Cranks : Tensile Urban Legend 170mm
Freewheel : Monty 18t
Pedals : Wellgo mg-1 magnesium

Front wheel : Dob front rim on vis front hub, Laced with DT revolution spokes and alloy
nipples.

Rear wheel : Vis rear rim with echo fixed 116mm rear disc hub. Laced with DT revolution
spokes and alloy nipples

Front tire : Kenda Blue Groove 2.1 folding bead
Rear tire : Maxxis 2.5 minion DHR super tacky. side knobs cut off

展開附加圖片 >> 附加圖片
btt
  RE: details on dob
  回應者: 小江     回應時間: 2008/05/27
   
Bled with water

ok,that's real sick!

did you use only water or there were some oil left and mixed with water ?
btt
  RE: details on dob
  回應者: Kevin     回應時間: 2008/05/27
   
only water. make sure you get all the oil out. then every 3 or 4 weeks you can drip a little bit of mineral oil on the seals in the lever and in the slave cylinders
btt
  RE: details on dob
  回應者: 橘祖     回應時間: 2008/05/27
   
astonishing and beasty.....

I love the tidy style you run on the dob. Pure and simple. I hope I can have a czar just like Ben Travis's one day ~~~~
btt
  RE: details on dob
  回應者: mark     回應時間: 2008/05/27
   
KEVIN 的 MAGURA HS-33 煞車油用清水而已啊! 根據HS-33的使用說明, 假如沒有MAGURA專用的剎車油可用時是可以暫用其他的油品如蔬菜油代替, 但是建議還是要使用指定油.

使用水代替油會有甚麼差別呢? 照理說一樣是液態的物質都是不可壓縮的都可以傳導壓力, 問題是水與油的熱傳導不一樣, 對剎車皮磨擦時產生的熱會有不同的反應, 還有水對剎車內部的組件比較會有氧化的可能, 我是大概這樣想, 細節就要問物理學家小江了.
btt
  RE: details on dob
  回應者: Kevin     回應時間: 2008/05/28
   
water has less viscosity than oil, makeing the lever feel much faster. your pads retract faster too, so you don't get that slow dragging feeling when you let go of your brakes.
btt
  RE: details on dob
  回應者: Kevin     回應時間: 2008/05/28
   
make sure you use distilled water, not water with minerals in it.
btt
  RE: details on dob
  回應者: mark     回應時間: 2008/05/28
   
I remember there is another point saying that oil have higher boiling temperature than water, when the temperature reach the boiling point, the air inside will have certain effect, but as far as the design of disk brake variable, some have air space and some have no air, I think the result will be different too.

And bike trial use brake not so violent as downhill riding, that make difference too.
btt
  RE: details on dob
  回應者: Kevin     回應時間: 2008/05/28
   
there's not that much modulation with hs-33. i don't even think there is enough heat generated from disc brakes during trials use.
btt
  RE: details on dob
  回應者: mark     回應時間: 2008/05/28
   
Well, some North America automobile become overheated in summer of Taiwan, the maker have to make the tropical spec for some area.
btt
  RE: details on dob
  回應者: Kevin     回應時間: 2008/05/29
   
thats true. i wonder if the water will evaporate in taiwan hahaha. we'll find out when i'm there
btt
  RE: details on dob
  回應者: 橘祖     回應時間: 2008/05/29
   
Don't worry about it. Taiwan is more humid than North America. You can get more water in the air. The only thing that will evaporate is you. Not the water in your brake. But I think maybe I'll run the water instead of oil in HS33 if the feeling of modulation is really sick.
btt
  RE: details on dob
  回應者: 小江     回應時間: 2008/05/29
   
I wonder how it works in a subzero environment ^^
btt
  RE: details on dob
  回應者: mark     回應時間: 2008/05/30
   
It's a major effect of oil price raising in Canada.