登入或註冊帳號即可開始張貼主題
17 回應
10883 觀看
.jpg)
.jpg)
|
|
|
回應者: mark
回應時間: 2009/04/24
|
引用 Kevin 的文章-no. i just grind every 3 to 4 rides
And what is the number of your grind disc?
.jpg)
|
|
|
回應者: Kevin
回應時間: 2009/04/24
|
i don't use sanding discs. i use either ceramic cutting, or metal cutting. metal cutting seems to work better.
|
|
|
|
回應者: mark
回應時間: 2009/04/24
|
I should take a good look at the tool store to know what ceramic disc or metal disc are.
What about the hardness of your pads? Are they stiff or soft?
What about the hardness of your pads? Are they stiff or soft?
.jpg)
|
|
|
回應者: Gordon (國棟)
回應時間: 2009/04/24
|
wooooh dude your booster looks really nice. how much you bought it for?? i am interested.
|
|
|
|
回應者: Kevin
回應時間: 2009/04/25
|
the pads are stiff. i don't think they will work very well unless you have a very sharp grind. they are very good though.引用 mark 的文章-I should take a good look at the tool store to know what ceramic disc or metal disc are.
What about the hardness of your pads? Are they stiff or soft?
the booster is a trialtech carbon fiber one. you can find them at www.trialspads.com
|
|
|
|
回應者: mark
回應時間: 2009/04/25
|
Do you grind the front rim as well as the rear rim?
|
|
|
|
回應者: mark
回應時間: 2009/04/25
|
Will the rim wear out very fast as long as you grind away the surface of rim every couple days?
|
|
|
|
回應者: Kevin
回應時間: 2009/04/26
|
they last about a year or so. by then it's time to get a new wheel anyways.
|
|
|
|
回應者: mark
回應時間: 2009/04/26
|
引用 Kevin 的文章-they last about a year or so. by then it's time to get a new wheel anyways.
A year for your use is quite acceptable, I found some metal grind disc on catalogue, there are three type of discs, fine medium and coarse, Which is better for the rims?
|
|
|
|
回應者: Kevin
回應時間: 2009/04/26
|
the actual roughness of the disc is not that important, since you're just using the sharp edge of the disc. each disc is only good for about 4-5 grinds, then it isnt sharp enough anymore. over here i can buy 20 discs for about 5 dollars canadian from my friend who works in construction. i can send them to taiwan haha!
|
|
|
|
回應者: mark
回應時間: 2009/04/26
|
It will run out a great fortune just because the pads thing and disc thing.
Is your disc brand "BOSCH"? made in Germany.
When the brake make a braking noise, is that true the greater noise means more powerful brake?
Is your disc brand "BOSCH"? made in Germany.
When the brake make a braking noise, is that true the greater noise means more powerful brake?
|
|
|
|
回應者: Kevin
回應時間: 2009/04/27
|
the rotor is a ashima from taiwan. they do a lot of oem for other companies, such as rockman bikes. you may see them with different branding here and there.
as for the rotor noise, it depends on the type of noise. if you're brake is leaking and the rotor is contaminated, it'll make a lower frequency honking noise. it's really hard to tell just by the noise though
as for the rotor noise, it depends on the type of noise. if you're brake is leaking and the rotor is contaminated, it'll make a lower frequency honking noise. it's really hard to tell just by the noise though