登入或註冊帳號即可開始張貼主題
引用 Eli 的文章-
你那個是因為轉接座太軟了, 不準.
我記得當初換neon就裝過, 然後後來只好馬上換掉. 因為現有的轉接座都不好.
不過今天聽Oronde說, 他的車也是用V-Brake, 不過因為也是要用轉接座, 他自己設計找工廠訂做出來以款好用的轉接座, 所以他現在非常喜歡V-Brake~
.jpg)
|
|
|
回應者: Eli
回應時間: 2009/04/26
|
.jpg)
|
|
|
回應者: FrankYueh
回應時間: 2009/04/26
|
引用 mark 的文章-V夾煞車器有沒有特別的要求或是什麼樣的品牌規格會比較好用呢?
我都是用Avid(型號品牌要去查一下). 主要"無四連桿"(會搖)和有一點等級"非學生車", 這類的都不錯.
|
|
|
|
回應者: FrankYueh
回應時間: 2009/04/26
|
.jpg)
|
|
|
回應者: mark
回應時間: 2009/04/26
|
|
|
|
|
回應者: Eli
回應時間: 2009/04/26
|
.jpg)
|
|
|
回應者: Kevin
回應時間: 2009/04/27
|
i used to run vee brakes to. i used shimano xtr lever with avid ultimate calipers. the avid ultimate calipers uses bearings, instead of sleeves. they dont have any play back and forth, and feel a lot better.
they make rock pads for vee brakes too!
they make rock pads for vee brakes too!
|
|
|
|
回應者: Kevin
回應時間: 2009/04/27
|
also, with sanding discs, even though the surface may seem rougher, they cuts are not as deep. you're also sanding away more rim material.
i found that initially, the braking is okay using a sanding disc. but by the end of the ride the braking performance drops substantially, especially when using harder durometer pads. i've used it before, but i prefer the metal cutting much better.
i found that initially, the braking is okay using a sanding disc. but by the end of the ride the braking performance drops substantially, especially when using harder durometer pads. i've used it before, but i prefer the metal cutting much better.
|
|
|
|
回應者: FrankYueh
回應時間: 2009/04/27
|
avid ultimate
Thats very expensive!!!!
Thats very expensive!!!!
|
|
|
|
回應者: Kevin
回應時間: 2009/04/27
|
in my opinion, avid ultimate is the only setup that is better than using a magura or echo sl brake.
the whole point of having a vee brake is to reduce the vibration of the pad. it's pointless if the brake arms move around. the movement is even worse than pad knock from disc brakes. i can't stand it.
vee brakes have a very weird feel. they don't have any bite, but have very good hold. maguras tend to have a lot more bite, but the hold is not as good when the bike goes backwards.
the whole point of having a vee brake is to reduce the vibration of the pad. it's pointless if the brake arms move around. the movement is even worse than pad knock from disc brakes. i can't stand it.
vee brakes have a very weird feel. they don't have any bite, but have very good hold. maguras tend to have a lot more bite, but the hold is not as good when the bike goes backwards.
|
|
|
|
回應者: mark
回應時間: 2009/04/27
|
Avid Ultimate 煞車夾器, 頂級貨頂級價.
http://tw.f3.page.bid.yahoo.com/tw/auction/c42530608
http://tw.f3.page.bid.yahoo.com/tw/auction/c42530608
.jpg)
|
|
|
回應者: Twins...
回應時間: 2009/04/27
|
.jpg)